Our turret winder is a two stage winder that can be controlled either manually or via the SMC PLC control system. The turret will rotate the core in both directions. The winder motor controls the speed of the wind based on input from the PLC. The SMC sheet is wound around hard paper cores that are held in place pneumatically. This is a custom made system and can be made to fit your specific requirements.
- Rotation either auto or manual
- Winder speed is matched to the SMC Line speed
- Unit has a jog switch to adjust sheet tension
- Winder motor increases/decreases winding speed as necessary based on PLC input
- Cores held in place pneumatically
- Core rotation controlled by air clutches